WifiTrax Vision for your Model Railroad
Checkout our NCE CAB Bus/Wi-Fi Interface
The WFD-30 module or
WFD-31 module
provides Wi-Fi Control of your NCE Command Station
and Boosters using the popular WiThrottle and
Engine Driver apps for Apple and Android as well as the
Wi-Fi Pro Cab provided by the WNI-32 and
TCS UWT-100 Universal Wi-Fi Throttle.
The name NCE and the NCE logo is the property of North Coast Engineering. reproduced to identify their products.
WiThrottle is the name of a communication protocol
and also of an Apple app written by Brett Hoffman.
Engine Driver is the name of an Android app written by M. Steve Todd.
Wi-Fi DCC - A Great Solution for Garden Railroads .
The Wifitrax battery loco concept applies our Wi-Fi/DCC concept to large scale, O gauge or HO locomotives that you might use in a garden railway. Anyone with a garden railway will know the difficulty of maintaining good electrical contact between locomotives and track after the winter weather has taken its toll. If you would like to run DCC on your garden railway locomotives you need to solve this problem even more urgently.
WifiTrax loco-based Wi-Fi DCC lets you control both your locomotives and your fixed layout features from your Tablet and Smartphone over your home Wi-Fi nework. That means you are free to walk around following your trains without any cable tethers. You can start with just one module in a loco such as WDMI-27 then later add a WFD-60 Gateway Module to form a Garden Network.
Loco-based Wi-Fi/DCC lets you use your favorite DCC decoder with or without sound in your loco, install one of our Wi-Fi/DCC Interface Modules and control your DCC Decoder over Wi-Fi from the same smartphone app.
About Wi-Fi/DCC Wi-Fi/DCC Interface Modules About Garden Railways
Wi-Fi DCC Trackside - A Complete Low-Cost DCC Solution
If you don't need battery locomotives and are happy with track DCC, you can uses Wi-Fi DCC Trackside to control both your locomotives and your fixed layout features from your Tablet and Smartphone over your home Wi-Fi nework. That means you are free to walk around following your trains without any cable tethers.
Trackside Wi-Fi DCC is a complete DCC solution consisting of Command Stations and Boosters that can provide up to 5 Amp of contiuous DCC current with offering short circuit protection and auto-reverse. A control bus provides connection between command station and boosters.
WFD-27 is an entry-level command station/booster combined providing 5 Amp power. WFD-46 is a booster providing up to 5 Amp power, adjustable DCC voltage, short circuit protection at 3A or 5A and auto-reverse.
About Wi-Fi/DCC Wi-Fi/DCC Interface Modules Wi-Fi/DCC TracksideControlling Switches etc. using Wi-Fi Layout Products .
Use the Tower Operator App to control the switches and lights on your layout
This app runs on Android or Windows 10 and allows your to control switches, lights, signals and power districts.
Wi-Fi Layout Products
WFS-47 4-Way Wi-Fi/DCC Universal Switch Machine Controller .
Also checkout the WFS-87 for 8-way switch machine control.
Control your turnouts using the in-built web pages, your DCC Command Station or a WiThrottle app on your phone (with WFD-60). You can also use our free Tower Operator App to control four of your model railroad switches by tapping a switch symbol on the custom layout map you build on your Windows 10 or Android computer or tablet.
Works with dual coil, single coil or stall-motor switch machines.
Only needs DC power, or can use DCC or constant DC power from the track. .
WFS-47 measures 90mm x 60mm (3.54 x 2.36 inch) and mounts under your baseboard or under a building.
There are four sets of three screw terminals that are easily wired to your switch machines - either 2 or 3-wire connections.
Connect the power terminals to your track or an DC power supply.
Capacitor discharge design. .
Up to 24V capacitor charge will drive most dual coil switch machines including spring switches such as Peco.
Charge pump circuit generates up to 24V from track power.
Compatible with all Switch Machines we Know. .
Mount the WFS-47 anywhere on your layout to control a group of up to four dual-coil, single coil, stall motor or end-switch motor switch machines.
WFG-82 8-Way Wi-Fi Lighting and General Purpose Controller .
With this module you can use our free Tower Operator App to control eight LED or filament lamps by tapping a symbol on the custom layout map you build on your Windows 10 or Android computer or tablet. You can control single lights or group the outputs to control 2-Light or 3-Light Signals by tapping the symbol on your layout map.