WFG-82 8-Way 3-Amp Lighting/General Controller
WFG-82 8-Way Wi-Fi 3-Amp Lighting and General Purpose Controller
In stock NOW for immediate shipment!
With this module you can control eight lights, signals or other devices requiring up to one amp of current switched on or off. You can control from any DCC Command Station and Booster, the devices's own web page or the Wifitrax WFD-60. You can also use our free Tower Operator App to control eight LED or filament lamps by tapping a symbol on the custom layout map you build on your Windows 10 or Android computer or tablet. You can control single lights or group the outputs to control 2-Light or 3-Light Signals by tapping the symbol on your layout map.
This Wi-Fi Lighting and General Purpose Controller provides Wi-Fi Control of eight LED or grain-of-wheat lamps. This product is useful when you have a group of up to eight lights fairly close together. If you have more than eight lights in fairly close proximity you can use a second Lighting and General Purpose Controller. Full Description and Specification Read the Quick Start Document Read the Full Manual
WFS-82 8-Way Wi-Fi 3-Amp Lighting and General Purpose Controller
This module can be easily installed on any scale model railroad where there is a requirement to operate up to eight LED or incandescent lamps.
You can control each channel either:
From the devices own, internally generated web pages
From any DCC Command Station and Booster, by addressing it as an Accessory
From a Wifitrax DCC Command Station/Booster such as Wifitrax WFD-26, WFD-27, WFD-28, by including it in a roster or panel
From a WFD-60 Wi-Fi and DCC Gateway using either buttons or by creating a panel
using our free Tower Operator App that runs on Windows 10 and Android.
Use it to control individual lights in buildings, platforms, freight yards, street lamps etc. Use outputs in groups to control colored light signals.
Versatile current drive capability can control most small LEDs and incandescent lamps using track or separate power.
Maximum load 1 Amp per channel with 3 Amps total from the module. The device has high-side drivers, switching the positive supply. The Negative Sides are common.
Fully compatible with DCC systems. Can use power from DCC Booster, DC or DCC supply from track or separate DC supply.
WFG-82 8-Way Wi-Fi Lighting and General Purpose Controller. Specifications.
Dimensions
Length: 100mm (3.94") Width: 80mm (3.15") Maximum Height: 15mm (0.59")
Functions and Modes of Operation
Installs on your layout to provide direct Wi-Fi control of LEDs Filament Lamps Lamps. Control compatible with:
DCC Input using Accessory Addressing,
In-built Web Pages,
WFD-60 Wi-Fi Gateway using Web-Page Panels,
Wifitrax Tower Operator App on Android or Windows 10.
Provides individual on/off control of eight 2-wire outputs, with the negative sides common and connected together on the module. If you want a common positive side, use the WFG-84.
Series resistors provided on unit switchable in or out using links provided. Remove the links for LEDs or add them and use your own series resistors. add the links for filament lamps.
Power Supply Options
12 to 18 Volts DC independent power, wired to screw teminals on unit. This unit does not operate using AC.
Power supplied from NMRA Compatible DCC Booster may be used as alternative to DC.
Output Current Capability
1 Amp Maximum per channel. Total should not exceed 3 Amps from the module.
Over-current protection is provided.
Connections
Eight pairs of screw terminal outputs to connect to LEDs, incandescent lamps or other devices, negative side common.
Two screw terminal connections for DCC Control Input.
Two screw terminal connections for DC or DCC power. Do not use AC.
Mounting
Four M3 mounting holes for use with screws, nuts and spacers, or suitable wood screws with spacers.