FWA-10 USB Workshop Adapter Module (Grabbers)
FWA-10 USB Workshop Adapter Module
Available now.
The FWA-10 provides capability to use our WifiTrax Workshop Windows software to update the firmware in your WifiTrax module. The module contains a USB/Serial adapter chip mounted on a PCB and with grabber leads attached. The grabber leads are attached to holes in your WifiTrax module to communicate with the serial interface of the on-boad microprocessor. Attaching the module forces the microprocessor into boot mode which allows loading of firmware updates from WifiTrax using our WifiTrax Workshop software. You can also use the module to perform other serial operations with the module as may be later defined.
FWA-10 USB Workshop Adapter Module
The FWA-10 provides capability to use our WifiTrax Workshop Windows software to update the firmware in your WifiTrax module. The module contains a USB/Serial adapter chip mounted on a PCB and with grabber leads attached. The grabber leads are attached to holes in your WifiTrax module to communicate with the serial interface of the on-board microprocessor. Attaching the module forces the microprocessor into boot mode which allows loading of firmware updates from WifiTrax using our WifiTrax Workshop software. You can also use the module to perform other serial operations with the module as may be later defined.
FWA-10 USB Workshop Adapter Moduled
Input
USB Mini-B (5-pin) Connector. Connects via a USB cable to your Windows computer.
Outputs
4 flying leads with grabber hooks for connection to labelled holes in WifiTrax module under update.
1. Black - Ground.
2. Yellow TXD - Serial data transmitted FROM WifiTrax Module being updated (e.g. WFD-30, WDMI-27 etc.
3. Orange RXD - Serial data received TO WifiTrax Module being updated.
4. White /PGM - Pulled low by the WFA-10 to place WifiTrax Module in boot mode.